FLEXOTERM PLUS Some reservation ADHESIVE 12MMx1500MMx30MTL I High Density Thermal $310,Hardware , Window Hardware , Window Fittings,/gyrostat833437.html,PLUS,krutubechannel.com,ADHESIVE,12MMx1500MMx30MTL,High,FLEXOTERM,I,Thermal,Density $310 FLEXOTERM PLUS ADHESIVE 12MMx1500MMx30MTL High Density Thermal I Hardware Window Hardware Window Fittings $310,Hardware , Window Hardware , Window Fittings,/gyrostat833437.html,PLUS,krutubechannel.com,ADHESIVE,12MMx1500MMx30MTL,High,FLEXOTERM,I,Thermal,Density $310 FLEXOTERM PLUS ADHESIVE 12MMx1500MMx30MTL High Density Thermal I Hardware Window Hardware Window Fittings FLEXOTERM PLUS Some reservation ADHESIVE 12MMx1500MMx30MTL I High Density Thermal

FLEXOTERM PLUS Some reservation latest ADHESIVE 12MMx1500MMx30MTL I High Density Thermal

FLEXOTERM PLUS ADHESIVE 12MMx1500MMx30MTL High Density Thermal I

$310

FLEXOTERM PLUS ADHESIVE 12MMx1500MMx30MTL High Density Thermal I

|||

Product description

Insulating panel with an adhesive side with very high thermal insulation specifically designed for the insulation of wooden, PVC and aluminum cladding bins

Insulating panel in closed cell cross-linked polyethylene and additivated with high density graphite (30 kg/m3) and very high thermal insulation (U=0.035) specifically designed for the insulation of bins from wood, PVC and aluminum. Equipped with a self-adhesive side coated with a very tough acrylic glue: it is the most suitable product for coating bins with an insulating and completely waterproof material. It is very easy to process: it is cut with scissors or cutter and is perfectly waterproof to steam (Ugt;2000), air and water.

Areas of application:
The Flexoterm Plus panel has been specifically designed for the insulation of cladding bins. Thanks to its very strong adhesive, it has an excellent adhesion on the most common surfaces of bins (wood/MDF/PVC/Aluminium/Sheet). Adherent surfaces must be cleaned to facilitate the adhesion of the insulator. After cutting the panel to the required size, remove the protective film and stick it to the inner surface of the dumpster after it is properly placed. In order to facilitate the gluing of the panel to the dumpster exert a good pressure for a few seconds to promote its adhesion to the support. Normally the panel is always installed on the dumpster disassembled directly in the workshop. However, the panel can also be used for gluing directly on the site, remembering to clean the adhering surfaces well and to check in advance that the thickness of the panel does not interfere with the sliding of the roller blind in the dumpster.
Certifications and Performance:
Coeff. Steam diffusion UNI EN 12086 U gt; 200
Thermal conductivity UNI EN

FLEXOTERM PLUS ADHESIVE 12MMx1500MMx30MTL High Density Thermal I